About Me

My photo
I make toys for kids who don't want to grow up. I'm on the lookout for new projects. If you're interested in commissioning me to build something ridiculous, shoot me an email.

Tuesday, May 24, 2011

HALO Marines Continued

When I last wrote about this project, I just had the one helmet cast:
Marine Helmet Test Fit 1



I've got more of them now:
Booth Building20



While I was away in Japan, I also ordered all of the soft parts of the costumes. Just to make sure things looked right, I asked my sister to model them for me and shoot me some pictures:
Medium and Small

Clearly, she wasn't very happy about it, but I figure it's not much to ask after sending her her very own personalized helmet. On the other hand, her husband had a lot more fun with it:
Large Medium



Once I was back in town, I was able to dig through the boxes of other gear that had arrived and try it all on. I'm still waiting on the black MOLLE-style thigh panels, but the rest of the soft parts look about right:
Marine Fatigues Front



The tactical fanny packs might be a bit too big though:
Marine Fatigues Back



While I'm pretty happy with the way they looked fresh out of the box, they still needed some stitch work in order to be accurate to the game.  My friend Breana had agreed to do the sewing work I needed on the shirts.  Essentially, she was removing the sleeves from the fatigues and grafting them onto black t-shirts to make something like a combat shirt (occasionally referred to as "frog gear" in the US Marine Corps) so they'd look right under the armor and be tucked into the pants.



Somewhere along the way I started the paint work and put some primer on these guys:
HALO Marine Helmets



I also went ahead and painted the parts that would be flat black in the end, but you can't tell against the black primer.


When it became clear that the other maker wasn't going to come through with the vacformed parts of the body armor, I decided I had to go ahead and make my own bucks and form my own armor.  With just over a week to go, I had to go from concept to prototype to production to finished pieces.  I'm not really happy with that other guy.


To make up for his failure, I started by downloading the pepakura models from the HALO costuming wiki and building the back and chest plates.  Here's a shot of the back plate:
Back armor pep model


And another from a different angle:
Back Armor Pep Model Side


Working late into the evenings, I managed to crank out the back plate, chest plate, and one of the knees.  Pressed for time, I enlisted some help to build the pep models for other parts of the armor:
Production and Progress


Once the pep models were built, the next step was to cut them into formable pieces and reinforce them so they'd hold up to the pressure of vacforming.


Here's the first pull:
Marine Armor test pull


After some quick trimming, here's the first test-fit:
Torso Armor Test Fit


The bucks still needed a bit of work, but the concept was proven sound.  I am so happy I built this machine.


Once the bucks were adequately detailed for me to be happy with them, I gave them a quick coat of paint to help prevent me from losing them:
Marine Forming Bucks


The whole costume can be easily made from only two 2'x4' pieces of sheet plastic with room left over for other pieces.  Here's the first half of the pieces laid out on the forming table:
forming bucks laid out

The towel in the upper left is laid over one of my magnum pistol casts.  The idea was to build a holster to fit it.  Laying the towel over it makes sure there'd be room around the pistol so that it could slide in and out of the holster.

Here's a pull in .040" ABS plastic:
Marine Armor Kit pt.2


Here's the second half of the kit, also pulled in .040" ABS:
Marine Armor Kit pt.1


You may have noticed that I pulled some of the parts twice.  It turns out that there are a number of pieces that are interchangeable from left to right (i.e. many of the knee parts) so I only made one buck.  I should've done this with the shoulder parts as well, but I was working faster than I was thinking when I built the forming bucks for the shoulders.  Oops.


Since I was in a rush, I actually painted the base coat onto the armor parts before I even cut them out of their sheets:
Marine kit pre painted


For the color, I chose Olive Drab from the Ultra-Flat Krylon camouflage line. That, plus the texture molded to the ABS makes for a very convincing piece of military hardware.




It makes the helmets look pretty good too:
Trevor Tries on Marine Helmet


With all of the pieces formed and sprayed with their base color, the next step was to cut out all of the pieces and strap them all together with about a million feet of black nylon webbing.


Here's some of the rough cut pile of parts:
Armor Trimming

Since the masking on the helmets didn't really do the job, I had Mallory go back and touch up the black parts of the helmets:
Painting Helmets

She was rightly proud of her work:
Mallory's Helmet Lineup

Taking a break from sewing up shirts, my friend Breana stopped by to help me with some of the rough cutting on the parts:
Breana Trimming

Here's Trevor doing some smooth cutting and fitting some of the straps:
Trevor Trimming Armor

Here I am test fitting one of the smaller chest plates:
Test Fitting Armor

I'd also started work on some vacformed holsters for the Magnum pistols, but they didn't really come together and I need to take this design back to the drawing board:
Shawn Making Holsters

Since my sister Rose had agreed to wear one of these rigs, I test fit the shoulder armor to her (you can't see the collar piece under her hair):
Rose the Shoulder Model

I also test fitted my sister Sheryl with a set just in case:
Sheryl Armor Fitting
The shoulder straps are repurposed from shoulder straps designed for old-school military ALICE backpacks.  Each set of armor also uses up about ten feet of 1" nylon webbing, another four or five feet of 1/2" webbing, and a handful of parachute buckles and strap adjusters.  Fortunately I'd already bought these parts in preparation for building the sets of armor that that other guy didn't deliver.

Once we'd strapped a few sets, Rose and my nephew went ahead and did some touch-up painting:
Chest and back strapping

Meanwhile, my niece went ahead and separated the pile of soft parts into kits by size:
Skylar laying out gear issue

Sheryl and Rose made a point to ham it up when I took some pics of them doing the last-minute prep work on the straps and buckles:
Vamping up the Armor Strapping

The next day was day one at the Bay Area Maker Faire and all that was left to do was to dress everyone up:
Corporal Braal
The combat knife pictured above is just a raw casting in black resin that's been riveted straight onto the chest plate. 

I had at least one fire team dressed out all weekend:
UNSC Marine Fire Team

Here they are with one of my ODST suits (made from a kit by the talented Sean Bradley):
Marines and an ODST

The plan for the Marines was to have them act as escorts for the folks in my Spartan costumes at the Maker Faire.  This way the folks in the much heavier suits could have someone to watch their back and keep them from tripping over things:
Spartan and Sniper

Apart from that, I just told them to go out, walk around, have fun, and get pictures.  This they did.
Shooters

R2D2 and Marines

Somewhere along the way they were found by one of the other costumers from the 405th.com HALO costuming forum.  He goes by the username Sir Tsaboc and here's a shot of him in his excellent ODST armor with a couple of my marines:
Sir Tsaboc ODST


Charlie's Angels anyone?
UNSC Charlie's Angels


Patrolling 1


Rifle consultation


Carousel Patrol

Here they are posing with a couple of the members of the San Mateo Police Department:
San Mateo PD

HALO 4: Guitar Halo...
Guitar Hero?

Deadly Smoochin

Rose Killing a Sammich

Hard Core Mallory Cole

UNSC MWR Facility

The armor still needs some refinement, but I'm pretty happy with how it all came out.  At this point it may be some time before I get back to tinkering with them though.

I've also learned that  9mm magazine pouch is just the right size for storing a tube of lip gloss.  Who knew?

.

11 comments:

  1. Awesome! Is it possible to buy anything? If so, do you have anything on 30 dollers? A weapon, a gun, a helmet, anything (HALO) patrick_skaar@hotmail.com

    ReplyDelete
  2. Hey man, are you selling full UNSC marine uniforms? and Do you make Halo airsoft guns? I'd really love to have them for my Airsoft team. lol Next I'll be looking for a Warthog.

    ReplyDelete
  3. I was just wondering what the price range was for making a HALO UNSC Marine outfit? I was thinking of trying to make my own.

    ReplyDelete
  4. Hey, how much would i have to pay you to make me a CAMS style helmet, shoulders, chest, thigh pads and chest cuz i suck at that stuff and am putting together a CAMS cos that i want to use at EB expo this year... Im willing to pay any reasonable price, please get back to me, my email is d_brown@live.com.au.. This is also kind of an invite to others too... I just need proof of quality... Thanks and hope i didnt offend with the proof of quality thing.. Just been stung a few times is all...

    ReplyDelete
  5. I am very interested in your work and would like to know how much it would cost to get a UNSC Marine full marine uniform contact me at: milsimkakta@gmail.com

    ReplyDelete
  6. Hello. How much would it take to buy one of your marine helmets?? I have been a HUGE Halo geek since I first played it back in 2003-2004 and my favorite characters are the marines. I don't have the time, patience, nor the experience with EVA foam nor Paperkura to make my own. I have tried multiple times but always failed miserably. I have always wanted a Halo Marine helmet to display with my WW2 German helmets and other WW2 and Halo gear. If you could PLEASE message me at Jackson.Smith08@yahoo.com with your price or at least info on how to correctly make one it would be GREATLY appreciated

    ReplyDelete
  7. Replies
    1. Shoot me an email at sthorsson99@yahoo.com and I'll see what I can do.

      Delete
  8. I have just waiting on a response! Would love to Commission you for a set.

    ReplyDelete