Late Post: My Shredder Costume from Teenage Mutant Ninja Turtles for Halloween 2023

I almost completely forgot to blog about this because, frankly, 3D printing has made projects like this way too easy and I actually forgot I was building it several times in the middle of the surprisingly quick project.  But it's a done thing, so I suppose I might as well brag about it.

A while back I acquired this helmet kit in a trade from a maker called "Portugeek" on the Replica Prop Forum.  I didn't get a photo of the unfinished kit, but here's one of his photos:

Trimmed and assembled, it looks like so:

Prepped, primed, and painted, the helmet looked like so:

Shiny!

Once that was done, it ended up spending longer than I'd like to admit just collecting dust on the shelf.  Then, while browsing Etsy one fine day in the middle of the night, I came across YoshStudios.  They had a pretty good looking set of 3D models to make Shredder's armor parts:


You can order the same set of files here: LINK.  The price?  Somewhere in the range of "Meh, why not?"

After downloading, I imported them into Netfabb and resized them to fit my digital carcass:

Printing was really a matter of setting up a few more print jobs to start each morning when I got to the shop and not forgetting where I put the printed parts as I checked each piece off of the "things I need to print" list.

Eventually I got the stack you see here:

Shredder's really not got a lot of armor.

Prepping was pretty straightforward.  Since this was a personal project that I was throwing together for Halloween, I didn't discard any reject prints that normally wouldn't have passed muster with me.  Instead, parts with minor flaws just got a bit of patch work before it was time to begin sanding and smoothing.

Here you can see one of the forearm bits with a split gap being filled in with a wad of paper towel soaked in CA glue for strength before adding a blob of Bondo:

Once all of the particularly egregious flaws were filled, the parts were all coated with XTC3D epoxy resin, given a bit of sanding and smoothing, and painted silver with Duplicolor Chrome:

While I was waiting for the paint to dry, I got to crafting the soft parts.  I started with cobbling together these nifty faux leather arm and leg wraps with zippers so they'd stay snug and straight:

Velcro patches added to the inside of the armor pieces were all the attachment they needed:

All too easy:

The lower leg armor was attached in much the same way:

The rest of the soft parts were pretty straightforward.  I started by ordering this pair of comfy black pants (LINK) because there's nothing special enough about Shredder's pants to justify sewing something custom.

In fact, the only real sewing to be done was this goofy tunic he wears.  I'd like to brag about the complex construction of this garment and the amount of draping and patterning I had to do in order to bring it together, but in all honesty it was a basic body block.   Since the neck would be covered by the cape, the only thing that needed any careful finishing was the couple of rectangles of fabric added to the front and back to get the proper hemline.  Frankly, in my last minute Halloween rush, I didn't do the best job on that hemline:

Velcro tabs were added to the tunic to hold on the shoulder armor.  A simple belt made from the same faux leather as the arm and leg wraps finished the look:

I know what you're thinking.  You're thinking, "No, you IDIOT! Shredder doesn't wear sneakers."

Turns out you're right.  While the artwork and styling has changed over the years, there's never been an image of the Shredder in Under Armor runnning shoes.  Given all of the possible options, I decided to finish my costume with an off the shelf pair of Tabi boots:

You can order your own pair here: LINK but you'll also want the right kind of socks (LINK).

With the shoes sorted out and the sewing done, it was time to take the shine off of the armor parts.  Weathering was a simple matter of slathering over all of the silver parts with some watered-down black acrylic paint, then daubing most of it back off with a damp cloth to leave more darkness in the recesses.

Done

So there I was standing there checking over my look in the mirror when my nephew walks in and sees me in the entire Shredder get-up.  

"How do I look?" I asked him, since he's currently the most qualified Teenage Mutant Ninja Turtles expert in the room.

"Pretty good," says he, expertly.

"Thanks." says I, thankfully.

"What are you going to be for Halloween this year," he asks, because apparently this outfit I'm wearing might just happen to be what I decided to wear on any given Thursday evening.  I guess he's not wrong.

"I don't know," replies me, "Do you have any suggestions?"

"I think you should go as the Shredder," he says matter of factly, "you already have the costume ready."

"Good thinking, dude.  I'm glad you're here."

Halloween that year was on a Tuesday, so I ended up going to my sister's house party on the Saturday night before.  Clearly I was ready:

As is my usual way, I failed to get enough photos.  Someone snapped this winner:

I also found out that this costume is perfect for snagging hors d'oeuvres: 

I just need to remember to clean everything afterwards:

I don't think Shredder's armor is dishwasher safe.

I don't entirely remember what I was picking out of the purse here, but the picture struck me as chuckleworthy:

This one too:

In any case, Halloween proper was Tuesday and I was shanghaied into going to my nephews' elementary school for their annual "trunk or treat" event.  My job was to hand out candy to children:

As luck would have it, I ran into at least eight or nine ninja turtles that day:

Now I just need to do a proper photoshoot to show off the finished product.  Hopefully soon.

I still haven't figured out what I'll be for Halloween 2024.  Any suggestions?