About Me

My photo
I make toys for kids who don't want to grow up. I'm on the lookout for new projects. If you're interested in commissioning me to build something ridiculous, shoot me an email.
Showing posts with label Mass Effect 2. Show all posts
Showing posts with label Mass Effect 2. Show all posts

Sunday, February 26, 2012

Propbuilding 101 Part 2: CNC Machining the M9 Tempest Submachine Gun from Mass Effect 2

My work on the M3 Predator heavy pistol a while back got a lot of notice.  One of the folks who saw it was a fellow prop enthusiast with a penchant for 3D modelling.  He contacted me about giving life to his rendering of another weapon from Mass Effect 2, the M9 Tempest submachine gun.

Since I'm determined to do a series of articles about my methods, this project will serve as a great example of how I use my Craftsman Carvewright CNC machine to build props.  For those of you just tuning in, I bought this machine secondhand almost two years ago.  It's temperamental and a bit frustrating sometimes, but when everything works it makes life a lot easier.  

In this case, I used it to create the prototype for these:
M9 Tempests Finished


Read on for a step-by-step process of how they were turned from bits and bytes into practical prop weapons.

Thursday, October 13, 2011

More Pics from Jia Jem's Photoshoot with my M3 Predator Pistol from Mass Effect

The other day I got a few more pics from Jia's photoshoot with my pistol. Here's my favorite:
Mass Effect Alternate Jack 5

Mass Effect Alternate Jack 8

Mass Effect Alternate Jack 9

Mass Effect Alternate Jack 10

Wednesday, October 12, 2011

Building the M-3 Predator Heavy Pistol from Mass Effect 2 Part III: Painting and Wiring

When I last posted about this project, I had just finished casting it in solid urethane casting resin.  After cleaning it up a bit and filling in a few bubbles, I gave it a coat of black primer.  Then I sprayed the silver parts with Mirrorchrome paint from SpazStix.  That was covered with a satin clearcoat before I masked it off and picked out the black parts in satin black.  Then I went back and picked out all of the details by hand.


Here's the clean paintjob before weathering:
M-3 Predator Paint Progress


The weathering was simplicity itself.  Since I wanted the black parts to look like they were made of some sort of composite, I didn't add any scratch marks at all.  Instead, I just gave the silver portions a black wash to pick out the details and dirty it up a bit.  I'm pretty pleased with the results:
M3 Predator Heavy Pistol Showcase Photo


For the lights I just pressed masking tape over the holes and then poured clear casting resin into the holes from the inside.  Then I embedded a high-intensity blue LED into the resin between the holes so light would shine through both holes.  I think it worked out pretty well:
M3 Predator Heavy Pistol in Hand for Scale


While it looks reasonably threatening all by itself, these pictures hardly do it justice.  So I turned to Jia Jem, a lovely cosplay genius with an amazing collection of outfits in her portfolio.  Her rendition of Jack (Subject Zero) seemed like the perfect model to showcase the finished pistol.  It turns out she was already contemplating another version of Jack based on some of the concept art by Matt Rhodes.  So this gave her an excuse to finish that up.


Here's the end result of the pairing:
Mass Effect Alternate Jack 1


Mass Effect Alternate Jack 3


Mass Effect Alternate Jack 4


Mass Effect Alternate Jack 2

She really did a great job and I couldn't be happier with the pictures.  She's also planning another photoshoot, so I'm looking forward to even more pics.

Monday, July 11, 2011

Building the M-3 Predator Heavy Pistol from Mass Effect 2 Part Two: Moldmaking

When last I wrote about this particular project it was all sorts of good-looking, like so:
Moe Pistola

As I mentioned at the time, it looked good but it was cobbled together from a variety of materials and it was a bit on the heavy side.  Plus, it suffered from an unfortunate case of being the only one I had.  Since I needed to send one to someone else and I wanted to keep one for myself (and I would probably make a few to sell to friends to offset costs) I had only two choices.  Either I would have to invent some sort of molecular replicator technology or I'd have to make a mold. 

I went with the mold making option.

The rubber I'm using in this case is AM128 Silicone RTV (Room Temperature Vulcanizing) moldmaking rubber from aeromarineproducts.com.  I buy from them because theirs is the lowest price I've found for silicone anywhere.  Even with the cost of shipping.  

AM128 moldmaking silicone also smells like grape-flavored bubble gum.  Don't eat it.

Silicone is a wonderful thing.  It has the ability to stick to nothing at all.  This is why you see so many cooking utensils made out of different grades of silicone.  In fact, the only thing that can stick to silicone is more silicone.  When you make a mold out of it, that means you can pour resin into the mold, wait for it to cure, and pull the cured part out without using any grease or mold release to prevent it from sticking to the mold.  It also has amazing detail reproduction properties.  There are actually certain grades of silicone that are used to duplicate cellular structures for later study in medical applications. 

There are a lot of different ways to go about making molds and each is great for certain things.  In this case, I opted for making a simple, two-piece box mold.  This means I'll have two chunks of rubber that fit into a box and there will be a hole in between them that's exactly the same shape as the original model.  When you pour resin into that hole and allow it to cure, it will form a copy of the model.  Here's how.

To make a box mold, you start by making a box:
M3 Predator Moldmaking

This particular box if made out of Medium Density Fiberboard (aka "MDF") that's 3/4" thick.  There are better options for these applications, but none of them were laying around in oddly sized and shaped scraps all over my workshop.  So MDF it was.

When building the box, the key thing to do is make sure you've got 1/2" of clearance all the way around the original model:
M3 Predator Moldmaking (2)

As you can see, I'm making both parts of the pistol in one mold.  This way I don't end up wasting a bunch of time and silicone making a whole 'nother mold.  You also want to make sure that the box won't leak.  For that, I just pushed a bit of oil-based clay into the seams to act as a sort of caulking.  Finally, you'll be taking the box apart a couple of times during the process, so use screws to hold it together.

Once I'd decided I liked the layout, the next step was to lay down a bed of clay to hold the model in place.  Since you'll be making a two-part mold, the shape you're making the clay in now will become the shape of the second half of the mold.

The first priority at this point is making sure that the model is tightly sealed in place.  At this point you're also deciding where the two halves of the mold will separate.  I try to follow along the edges of the model so that the seams will be easy to clean off.

Here's what the clay wall looks like once it's mostly formed:
M3 Predator Moldmaking (3)

When designing a mold, you have to give ample consideration to how the resin will flow into the mold as well as how air bubbles will flow out of the mold.  In this case I plan to pour the resin into the back end of the pistol next to where it's labelled "model 85C" above the grip.  Because air bubbles are likely to get trapped at the high points at the back of the grip and the rear sight, I've added vents there.  I've also set up "sprues" which act as pour spouts and vents between the main portion of the pistol and the removable body panel.  Those are the white plastic tubes running between the two pieces.

Finally, you need to set up "registration points," which are little holes that will line up with the little bumps on the other half of the mold to ensure that the two halves are properly aligned.  In this case, I simply pressed the rounded end of one of my sculpting tools into the surface of the clay to make oodles of little dimples:
M3 Predator Moldmaking (4)

Satisfied that the clay wall was just right, the next step was to pour the first batch of silicone.  This is often called the "print coat" as it picks up all of the minute details on the surface of the original.  Here's the first pour of about 23 fluid ounces of silicone RTV moldmaking rubber:
M3 Predator Moldmaking (5)


A note about silicone: READ THE INSTRUCTIONS.  If the manufacturer says the material must be mixed to a certain ratio by weight, you're going to need a scale in order to do it right.  Do not try to eyeball it or you're going to end up wasting a lot of material in the best case.  Worst case you'll waste a lot of material and ruin your original model in the process.  There are some types of silicone that can by mixed by volume.  They tend to be weaker and softer and wear out faster.  If you've got a mold that has finally failed due to age or overuse, don't throw it away.  You can cut it up into chunks that can be re-used as filler.

Anyhow, after the second or third batch of silicone, it was becoming clear that this mold was going to use up a small fortune in rubber goo.  Fortunately, I've got a few other molds laying around in the shop that have long since given up the ghost.  So I hacked one of them into bits and sunk the bits into the still-liquid silicone to take up space.  They were a different brand of silicone, so you can see them as blue chunks:
M3 Predator Moldmaking (6)

Once I'd squeezed as many rubber chunks as I could into the silicone, I poured one more batch on top just to hide the fact that I had recycled rubber inside:
M3 Predator Moldmaking (7)

The main challenge at this point is to leave it the hell alone long enough to properly cure.  I actually had to take a whole day off from being in my workshop just to resist the urge to pull the mold apart before it had properly cured.

The next day, I flipped the mold over, unscrewed the bottom of the box, and started pulling the clay off of the underside:
M-3 Pistol Mold Second Half2460

With the box and the clay removed, the first half of the mold looked like so:
M-3 Pistol Mold Second Half2461
Notice that everywhere I put a dimple into the clay, there's now a bump in the rubber.

As I mentioned before, silicone doesn't like to stick to anything except more silicone.  Now we have to pour the other half of the mold, but we don't want to have the two halves stick together and ruin all of the cute little dimples and bumps.  In order to prevent them from touching you'll need some sort of mold release.  There are all sorts of commercial options available, but I've found that a very light coat of Vaseline works just fine.

Once you've coated the first half of the mold with silicone, the next step is to reassemble the sides of the box around the mold:
M-3 Pistol Mold Second Half2462

When you do this, you want to set the sides of the box a bit higher than they originally were.  This way, after you pour everything, the box won't be quite as tall as the rubber mold.  When you reassemble the box, you can clamp it together a bit and help seal the two halves of the mold together.

Once the box is sealed around the first half of the rubber mold, it's time to pour more grape-scented goop:
M-3 Pistol Mold Second Half2463

And more:
M-3 Pistol Mold Second Half2464

And even more:
M-3 Pistol Mold Second Half2465

You may have noticed all of the bubbles in the pictures above.  One benefit of building the box mold like this is that the bubbles rise away from the surface of the original model.  You can do a lot of other things to eliminate the formation of bubbles in the silicone (such as putting the mixed silicone in a vacuum chamber) but with this method you really don't have to worry about it too much.

After allowing proper cure time (in other words, resist the urge to screw with it), the next step is to disassemble the box and pull the two halves of the mold apart:
M-3 Pistol Pulls2460

Now you need to pull the original out of the mold, clean off the Vaseline, and allow the rubber some time to dry out.  Even so, your first pull will likely end up with a bit of Vaseline residue or tiny bits of clay stuck to it.  I usually call the first cast a throw-away.

Once you've let the mold sit for a few hours, reassemble the box with the rubber mold inside.  At this point, you'll leave off the side of the box where your pour spout is.  Make sure to tighten the lid on the box just enough to squeeze the two halves of the rubber together so they won't leak.  If you make it too tight, you'll likely distort the shape of the hole you're about to fill.

Then set the box on end and pour resin into the pour spout until it fills up to where you can see it coming out of the vents.  As you pour, tap the mold or shake it gently to help any trapped air bubbles work their way out.  The resin I'm using is also from aeromarineproducts.com.  They have urethane casting resin in off-white (cheapest) black (a bit more expensive, but more reliable and faster to cure) and clear (most expensive, very temperamental and hard to work with).  In this case, I used their off-white resin with some black pigment added in to make the casting grey and microballoons added in to make it a bit lighter in weight.

Here's the first cast coming out of the mold:
M-3 Pistol Pulls2461

When I mentioned that the silicone picks up details very well, I wasn't kidding.  The lettering and logos you see in these pictures were vinyl decals that were stuck onto the prototype.  They're no thicker than a sheet of paper and you can clearly see them and feel them on the castings.
M-3 Pistol Pulls2462


For those of you keeping track, the mold took up something like 100 fluid ounces of silicone plus some leftover chunks of older molds.  The casting itself used up about 42 fluid ounces of mixed resin.


At this point, all that's left to do is cut off all of the "flashing" where a bit of resin has seeped into the seams of the mold as well as removing the extra plastic formed at the vents and pour spout.  That, and make another cast:
M-3 Pistol Pulls2463

Or lots of casts:
M-3 Pistol lineup

Then all you need to do is find an appropriately attractive model to help show off your creations:
M-3 Pistol Pulls2464

Stay tuned for Part 3: Wiring, Blinky Lights, and Painting.


.

Sunday, July 10, 2011

Building the M-3 Predator Heavy Pistol from Mass Effect 2: Part One

A while back I was contacted by a fellow costume geek who was working on a suit of armor from the popular video game Mass Effect 2.  She had her whole rig figured out, but was coming up short in the pistol department.  It seems that she couldn't find anyone who makes a good-looking replica of the exact pistol she was after, the M-3 Predator.  Here's a couple of reference pictures:



Since these were the best references I could find online, I asked her to email me some screenshots from the game showing the pistol from a variety of other angles.  Several megabytes later, I had enough material to work with.  I printed out some thirty pages of pictures (two to a page) and set to work.

The main body was cut from a piece of 3/4" thick MDF, then I laminated a layer of 1/8" pvc sheet to either side for a bit more thickness.  The curved body portions of either side were more pieces of MDF cut to the proper outline and then shaped with a body rasp.  After about two hours of tinkering, it looked like so:
Predator M-3 Build Beginning

Since the pistol has a pair of little blue lights on either side, I had to come up with a way to add some LEDs and a battery pack inside.  To that end, I made the panel removable on the left side of the body:
PIMG_4872

As you can see, I also added some strips of styrene to the rear sight to give it a bit more thickness.  Then I cut out some grooves in the upper and lower barrels, drilled them out from the ends, and fitted them with some plastic rod scraps I had on the bench:
pIMG_4870

At this point, the build was starting to take shape and I was pretty happy with it:
pIMG_4869

To make the grip a bit more hand-friendly (and game accurate) I built it up with a bit of Bondo auto body filler.  Since I was getting anxious about what it would look like, I shot it with a quick coat of grey primer:
Predator Right Side

Then I drilled out the fastener holes and carved in the seam lines and did a bit of sanding.  Then I sprayed it with black primer to fill a bit more of the bare MDF and get rid of some of the graininess.  Then I did a bit more sanding:
M-3 Predator Heavy PistolIMG_4966

To smooth it out a bit more, I gave it another coat of grey primer:
M-3 Predator Heavy PistolIMG_5035

The next thing I did was add the raised portions of the grip by building up a bit more Bondo and then sculpting it to shape.  I also added some ribs to the handguard area, carved in a bit more detail at the bottom of the grip, and the recessed area on either side of the handguard.  The last minor detail I needed to take care of was the forward sight. 

Once all this was done, I masked off all of the parts that needed to be smooth and sprayed the parts that needed to be rough with a liberal coating of non-skid truck bed liner:
M-3 Pistol Textured

I was thrilled with the resultant texture.  Unfortunately, this is when I noticed that I'd made the ribs on the handguard backwards.  After studying the reference images at length I decided that the areas I'd recessed needed to be raised instead.  I fixed them by adding some pieces of half-round styrene stock.  They're the white parts:
Predator Pistol Closed

The removable panel on the left side fit snugly enough for mere friction to hold it in place.  Not too shabby:
Predator Pistol Opened

Now if you're looking at the pictures above and scrolling back up to the original references, I'm sure you've noticed that many of the markings are the wrong color.  I know they are.  I figured at this stage I would probably end up making a mold and casting some copies.  The lettering and stripes were vinyl decals cut by my friend Matt Herman who has a side business making custom vinyl decals.  They're basically just there to act as painting guides in the cast copies.  This means Matt was able to just cut them out in whatever color vinyl he had laying around.

At this point, the pistol was complete and I was thrilled with it:
Predator Pistol Pose


At this point, you're looking at a somewhat heavy and somewhat fragile amalgamation of wood, plastic, paint, and vinyl stickers that would probably shatter into dozens of pieces if it were dropped on the floor.  This will not do.  If you're thinking I should've made it out of something else, you're right.  So I will.


Stay tuned for part two: moldmaking...


...I plan to write it up as a tutorial so you can mold duplicates of your own props.

.

Friday, June 17, 2011

Current Works in Progress

I dislike posting about unfinished things.  For me it's not much better than posting about things I'm thinking about doing.  Until a project is finished, it's not much more than a notion.  I figure if I write something like "I'm about halfway done building a functional jetpack," I might as well also go ahead and post "I'm making a cure for cancer," or "any minute now I'll write a novel." 


Still, sometimes I think there's not enough stuff getting finished in the workshop and I'm suffering from a lack of interesting things to post about.  So here I am reluctantly posting pictures of things that are getting done even if they're not getting finished quite yet...


First up, my friend Trevor has enlisted my help to build an Achilles costume for an upcoming Trojan War reenactment.  Here's a very early picture of his helmet coming together:
Trevor's Achilles Helm begins


On the subject of helmets, I'm still making progress on my Isaac Clarke engineering helmet from Dead Space 2:
Faceplate Finished


Here's the back of the helmet compared to a screenshot of the game character:
Helmet back refinements


Since I'm gearing up to start molding helmets, I dusted off one of my Warhammer 40,000 Space Marine Mk7 helmets and started modifying it like crazy to turn it into a Mark 8 helmet.  The dome still needs to be re-shaped and I need to sculpt out the grill, the brow ridge, the mohawk, the ears, and so on.  Still, you get the idea:
Chopped Space Marine Helmet


Since I'm on a roll with helmets, I pulled my Star Wars Republic Commando helmet off the backburner and started smoothing it out a bit more:
Republic Commando Helmet Smoothing


Speaking of backburner projects, I've begun tinkering with my HALO shotgun build again.  Here's the main body with the proper texture in place:
Shotgun Body Smoothing
The grip and the butt will be getting a much rougher texture before I'm done with them.


While I've been doing all of this, I've also had Lopez crank out slices of a new build for the MA5C Assault Rifle from HALO3:
Fit Testing Assembled AR Prototype


I'm also finishing up the forming bucks for the last four pieces of my HALO3 Marine armor:
Marine underarm forming bucks


Not feeling like I've got enough going on, I've taken on a commission to build the Predator M-3 heavy pistol from Mass Effect 2:
Predator M-3 Build Beginning


Meanwhile, I'm slowly putting together a batch of my kneeling garden gnome riflemen:
Gneeling Gnome Rifleman Squad

Stay tuned.  I'll be posting more about all of these projects as they come together...

.