Thor, the Goddess of Thunder Part 6: The Leather Bits

I've previously written about making the Goddess Thor's helmet HERE and HERE, her armor HERE, her hammer HERE, and the fabric parts of her costume HERE.

Now it's time to talk about her belt.  Depending on which render of her you find, her belt changes quite a bit from one image to the next.  I suppose some folks might get frustrated by the lack of standardization, but for me this is just a bit of license to be creative and do what I want.

In any case, the first thing I'd have to do is head out to one of my favorite places to get leather: the Tannery:


This is the warehouse at Barta Hide in Petaluma where you can buy off-cuts and scrap leather by the pound or you can get full hides in a variety of colors and thicknesses.  If you can get over the smell, it's awesome.  Pro tip: go on a day when the temperature and humidity are a bit lower.  Your olfactory nerves will thank you.

After picking up a few large, thick pieces of leather that I was happy with, the next step was to remove the existing finish.  For this, I soaked the surface with denatured alcohol, then scrubbed with a rag.  For some of the more tenacious spots, I used acetone:


After the surface was stripped, the leather was "cased."  This basically means I soaked it in water for a couple of nights.  Here it is after just a couple of hours when the remaining dye started leeching out of the leather:


After leaving it overnight, it looked like so:


I also picked up a basic set of leather carving tools:

I got the whole set here: LINK.

The next step was to learn how to use them.

The process begins with a design copied onto tracing paper.  Then you use a stylus to transfer an impression of the design onto the leather.  With that done, you use a swivel knife to cut the lines of the design partway into the leather.

The next step is to use the tools and mallet to dent the surface of the leather wherever you want ot darken it by adding recesses.

There's a lot more to this, but I'm only just learning at this point.  Here's how my first attempt came out on a scrap of leather:


And here's my second attempt


Not terrible for a beginner I suppose:


Having learned the very basics of leather tooling, I figured I could go ahead and make the Thor belt.  I started by cutting out two different versions:


Then I got myself sidetracked thinking of the shiny metallic discs that are mounted on the belts.  I decided that I could get away with some of these little blind spot mirror domes from the local auto parts store:


With the mount and frame removed, they're just about perfect:


They also come in different sizes:


But since I wanted a lip around the edges, I went ahead and sculpted a clay surround, pulled a quick mold, and cast copies in resin:


These were given a solid black basecoat before I chromed them:


getting back to work on the belt, I stripped off the finish and added all of the rivet details around the edges:


Then I riveted on the strap that hangs off of the hip:


Since time was running out before her convention debut, I didn't get a chance t carve any detailed pattern into the belt itself.  That'll have to wait for some later luxury free time.  For now, she looks the part:


Stay tuned for the final product and better photos.

November 2018 UFO Sightings in the Workshop

I hate to say it, but it's becoming somewhat standard by now.  I've fallen behind on bloggage again and until I get a chance to do a few proper photo shoots to better showcase some of my finished projects, I'm hesitant to write the project blog entries about them.

So once again, the best I can manage is another series of photos of UnFinished Objects from around the workshop.  Here's just a few of the things we've been working on...

First up, there's this growing stack of helmets in progress in the noisy, dusty room where my belt sander and Carvewright CNC machines live:


Then there's a whole series of "Death Snails" I've been working on.  Some of them are almost done being painted, but here's how they look right now:


I've decided to start adding a few more simple Warhammer 40k builds to my to-do list, so here's the beginnings of an Eldar Warlock project:


The folks at Fundemonium have asked me to make a few more copies of their "Funbot" maquette.  They're coming together:


I've also got a few new helmets in the makings that just need to be molded.  Here's the Range Trooper from Solo:


And once in a while I still find time to tinker with the War Machine Build.  Here's the chest and back piece as it stands right now:


There's also the Locus build:


That's going to be pretty cool.

Stay tuned for more updates.  I'm hoping to have quite a bit to brag about soon.

Cobra Baroness Costume Part 1: the Rushed Build

Growing up in rural Northern California, there were long portions of my childhood where we had either no television or just whatever local stations we could pick up with the rabbit ear antennae.  Fortunately, somewhere on one of those stations I was able to watch the old GI Joe cartoons.

In hindsight, grown-up me has no trouble thinking of each episode as a 30-minute toy commercial.  But that didn't stop 9-year-old me from having one heck of a crush on this lady:



This is the Baroness, aka Anastasia Cisarovna, the intelligence officer for Cobra, an evil terrorist organization, determined to rule the world.  She was one of Cobra Commander's top lieutenants, responsible for all kinds of espionage operations.  But more importantly, her long black hair, black-rimmed glasses, skin-tight black leather outfit, and over-the-top Eastern European accent meant that this ruthless femme fatale was largely responsible for a whole generation of fetishes and fantasies.

Fast forward a couple or three decades and my friend Rachel mentions that she's thinking of dressing up as this character for Halloween.  Since I'd been meaning to make this outfit for the Lady Shawnon for quite some time, this was all it took for me to embark on a rushed build of all of the armor parts, pick up some airsoft weapons and skin-tight catsuits, and churn out two copies of this costume in a hurry.

Here's the nearly finished result:


To see how the parts were made, read on...