About Me

My photo
I make toys for kids who don't want to grow up. I'm on the lookout for new projects. If you're interested in commissioning me to build something ridiculous, shoot me an email.

Monday, August 19, 2013

Moldmaking Tutorial for Maker Camp

A while back I was asked by MAKE Magazine to come out to their headquarters and teach a quick lesson as part of their Maker Camp, a virtual summer camp conducted via Google Hangouts.  Each day they host a number of hangouts to discuss different projects their virtual campers are working on as well as a demonstration of various tools or techniques for making all sorts of interesting things.

My demonstration: making a couple of simple molds for prop building.  You can watch the whole thing right here:





 I did a detailed write-up about the one-sided mold a few days ago, but I'll also be doing an in-depth article about the two-sided mold just as soon as I get a chance to get a few more photos of the molds in progress.


Stay tuned!

Wednesday, August 14, 2013

Prop Building 101: Making a One-Sided Silicone Mold

A while back, the folks at MAKE Magazine asked me to do a quick moldmaking demonstration as part of their "Maker Camp," a virtual summer camp program conducted via Google+ Hangouts.  I was happy to oblige.  I usually have a handful of simple projects on my get-around-to-it list and this was an excuse to knock a couple of them out. 

The first type of mold I demonstrated was a one-sided mold occasionally referred to as a "block mold."  This is the type of mold you make when you need to replicate something with a flat side that has no details.  When laid on that side, the piece has to have no significant undercuts where bubbles will be trapped.


I decided that the perfect candidate for reproduction would be a simple barbell plate.  I started by carving out a quick prototype on my CNC machine:
Barbell Carved

Here it is after a light sanding:
Barbell Cleaned



I gave it a couple of coats of primer to seal up the surface and then it was time to set it up for molding.  

First, I glued it down to a piece of cardboard so it wouldn't float away once I poured silicone over it.  Then I used more cardboard to glue together a watertight wall around the plate with an approximate standoff of one inch.

Here's a shot of the painted prototype with mold box built around it:
Barbell Mold Box Setup

After double-checking to be sure that the box wouldn't leak, I mixed up a batch of silicone RTV moldmaking rubber and began pouring:
Barbell Mold Pouring Silicone 2


When pouring the rubber, it's a good idea to start pouring into a low part of the mold.  This way the rubber will flow up and over the part in the mold without trapping as many bubbles against the surface of the part.

After filling the mold box so that there was at least 1/2" of silicone over the top of the part, I left it overnight to cure.  You want that half inch of rubber so that any bubbles will have a chance to rise up and away from the surface of the piece you're replicating.  Any bubbles in the rubber now will become warts on the copies when it comes time to make castings.
 
Once the rubber had completely cured, the next step was to flip the mold over and remove the cardboard:
Mold Peeled Off of Backing

With the cardboard peeled off, you can peel the rubber off of the prototype:
Prototype Removed

To make a copy of the prototype, it's just a quick matter of filling the silicone mold with a lightweight casting resin or expanding foam:
First Casting

Depending on the quality of the silicone rubber you use, you can get anywhere from twenty to sixty castings out of a mold like this.

While it looks just like any other 25-lb barbell plate, this particular casting weighs about 4 ounces.  It makes it look like I have really strong fingers:
Lightweight

Since I cast this particular plate in flexible foam, it'll bounce when you throw it at someone.

Fun!

Friday, August 2, 2013

Gnomes in Stock

The votes are in and the results were overwhelmingly in favor of sculpting the Mortar Launcher as the next Combat Garden Gnome.  Here's a few snapshots of the sculpt in progress:
 





There's still a few details to sort out, then I'll be ready to start making the mold for this guy.  Meanwhile, I've got a lot of other gnomes in stock:
Gnomes in Stock

You can pick up one (or many) of your very own at http://etsy.com/shop/thorssoli right now.  Use the coupon code "BLOGGER" at checkout for 10% off your order.

Also, I had someone ask me a while back if it's possible to buy prints of the photos I use in the Etsy listings.  So I went ahead and set up my Deviant Art gallery to offer prints.  You can check it out here: http://thorssoli.deviantart.com/gallery/

I've got four or five big projects that are rapidly approaching their finish lines.  Be sure to check back soon for updates.